Azzar Butt Welding Pipe Fittings 45 Grad minkeb
45 Grad Minkeb
Materjal: Azzar tal-Karbonju, Azzar Stainless, Azzar Liga
Tekniku: Falsifikati u imbuttar
Konnessjoni: Iwweldjar
Standard: ANSI, ASME, AP15L, DIN, JIS, BS, GB
Tip: 45 ° u 90 ° LR / SR minkeb, Reducers, Tee, Liwjiet, Kap, Salib.
Ħxuna tal-ħajt: SCH5-SCH160 XS XXS STD
Wiċċ: Żebgħa Iswed/Żejt li ma jgħaddix is-sadid/Hot Dipped Galvanized
Angoli: 30/45/60/90/180°
Daqs: 1/2”-80”/DN15-DN2000
Ċertifikat: ISO -9001:2000, API, CCS
Applikazzjoni: Industrija Kimika, Industrija tal-Pitrolju, Industrija tal-Kostruzzjoni u Oħrajn
Spezzjoni: Iċċekkja In-House tal-Fabbrika jew Spezzjoni ta' Parti Terza
Ippakkjar: Pallets tal-Plywood / Kawża tal-Injam Jew Skont l-Ispeċifikazzjoni tiegħek
Il-minkeb huwa twaħħil tal-pajp li jibdel id-direzzjoni tal-pipeline fis-sistema tal-pipeline.Skont l-angolu, hemm tliet minkbejn l-aktar użati komunement: 45 ° u 90 ° 180 °, u minkbejn angolu anormali oħra bħal 60 ° huma wkoll inklużi skont il-ħtiġijiet tal-proġett.Materjali tal-minkeb jinkludu ħadid fondut, azzar li ma jissaddadx, azzar illigat, ħadid fondut malleabbli, azzar tal-karbonju, metalli mhux tal-ħadid u plastiks.Il-metodi ta 'konnessjoni ma' pajpijiet jinkludu: iwweldjar dirett (l-aktar metodu użat komunement) konnessjoni tal-flanġ, konnessjoni hot-melt, konnessjoni ta 'fużjoni elettrika, konnessjoni bil-kamin u konnessjoni tas-sokit.Skont il-proċess tal-produzzjoni, jista 'jinqasam fi: minkeb tal-iwweldjar, minkeb tal-ittimbrar, minkeb push, minkeb tal-ikkastjar, eċċ ismijiet oħra: minkeb ta' 90 grad, liwja tal-angolu rett, liwja tal-imħabba, eċċ.
ASME B16.9, B16.28
| Daqs tal-pajp | Fittings kollha | 90 & 45 Minkbejn u Tees | Reducers u Lap Joint Stub truf | Tappijiet | |||||||
|
| Dijametru ta' Barra f'Tastatur, D (1) | Dijametru ta' ġewwa fit-tarf (1) | Ħxuna tal-ħajt t | Dimensjonijiet minn ċentru sa tarf A,B,C,M | Tul Ġenerali, F,H |
| |||||
|
|
|
|
|
|
| Tul Ġenerali, E | |||||
|
|
|
|
|
|
|
| |||||
|
| IN | MM | IN | MM |
| IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0.06 | +1.6 | ±0.03 | ±0.8 | Mhux Inqas Minn 87.5% tal-Ħxuna Nominali | ±0.06 | ±2 | ±0.06 | ±2 | ±0.12 | ±3 |
|
| -0.03 | -0.8 |
|
|
|
|
|
|
|
|
|
| 3 ~ 2½ | ±0.06 | ±1.6 | ±0.06 | ±1.6 |
|
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
| 5 ~ 8 | +0.09 | +2.4 |
|
|
|
|
|
|
| ±0.25 | ±6 |
|
| -0.06 | -1.6 |
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0.16 | +4.0 | ±0.12 | ±3.2 |
| ±0.09 |
| ±0.09 |
|
|
|
|
| -0.12 | -3.2 |
|
|
|
|
|
|
|
|
|
| 20 ~ 24 | +0.25 -0.19 | +6.4 -4.8 | ±0.19 | ±4.8 |
|
|
|
|
|
|
|
| 26 ~ 30 |
|
|
|
|
| ±0.12 | ±3 | ±0.19 | ±5 | ±0.38 | ±10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 32 ~ 48 |
|
|
|
|
| ±0.19 | ±5 |
|
|
| |
| Daqs tal-pajp | Lap Joint Stub Trufs (2) | 180 Liwjiet Ritorn | ||||||||||
|
| Dijametru ta' Barra tal-Ħoġor, G | Ħxuna tal-ħoġor | Raġġ tal-flett ta' Lap, R | Dimensjoni minn ċentru għal ċentru, O | lura għal- Dimensjoni tal-wiċċ, K | Allinjament ta' Tispiċċa, U | ||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
|
| IN | MM | IN | MM | IN | MM | IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0 -0.03 | +0 -1 | +0.06 -0 | +1.6 -0 | +0 -0.03 | +0 -1 | ±0.25 | ±6 | ±0.25 | ±6 | ±0.03 | ±1 |
| 3 ~ 2½ |
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
|
|
|
| +0 -0.06 | +0 -2 |
|
|
|
|
|
|
| 5 ~ 8 |
|
|
|
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0 -0.06 | +0 -2 | +0.12 -0 | +3.2 -0 |
|
| ±0.38 | ±10 |
|
| ±0.06 | ±2 |
| 20 ~ 24 |
|
|
|
|
|
|
|
|
|
|
| |
| Daqs tal-pajp | Angolu Mitfi, Q | Barra mill-Pjan, P | ||
|
| IN | MM | IN | MM |
| ½ ~ 4 | ± 0.03 | ± 1 | ± 0.06 | ± 2 |
| 5 ~ 8 | ± 0.06 | ± 2 | ± 0.12 | ± 4 |
| 10 ~ 12 | ± 0.09 | ± 0.19 | ± 5 | |
| 14 ~ 16 | ± 3 | ± 0.25 | ± 6 | |
| 18 ~ 24 | ± 0.12 | ± 4 | ± 0.38 | ± 10 |
| 26 ~ 30 | ± 0.19 | ± 5 | ||
| 32 ~ 42 | ± 0.50 | ± 13 | ||
| 44 ~ 48 | ± 0.75 | ± 19 | ||
NOTI:
Barra minn tond hija s-somma ta' valuri assoluti ta' tolleranzi ta' plus u minus.
Id-dijametru ta' barra tal-kanna ara t-tabella f'paġna 15.
